Flora Export Silicone Based Interior Paint


It is used on inner surfaces of building elements such as coating, exposed concrete, brick, wallpaper, chipboard, plaster, plaster board and etc.


Flora Export is silicone based. It is water based and it has high breathing capability. It has been formulated to have a high level of hiding power and easy applicability. It does not crack, blister or fall off. Colors do not fade and white bears a high level of whiteness.


Appearance: flat, smooth
Chemical Structure: Acrylic copolymer emulsion
Density: 1.75 gr/cm³
Viscosity: 120 KU -125 KU at 25°C
Thinner: Water
Ph: 8-9
Solid Matter Quantity: 75% – 80%
Recommended Application: 2 Coat
Drying Period: Full drying period is max. 24 hours, waiting period between coats is min. 2 hours
Gloss: semi flat
The Largest Particle Size: thin
Opacity: Class 1 (4 m²/L) • Wet Scrub Resistance: Class 4


Surfaces to apply Flora Export paint should be endurable, dry, clean and able to carry the paint. Cracked or damaged surfaces should be fixed before application. High absorbent surfaces to be painted for the first time such as mineral based plaster, shall be undercoated with Kardelen Insulated Primer. Application surfaces and ambient temperature should be between at least 5°C. Flora Export can be applied with rolls and or brushes.


It is recommended to thin at a ratio of 10% – 25% depending on surface conditions with clean water including no other solvent or foreign material; and apply two coats of paint.


Depending on absorption properties of the surface, with 1 kg Flora Export Paint 8 – 10 m² area, and with 1 lt Flora Export Paint 10-14 m² area can be painted


Storable for 1 years in cool and dry places away from direct sunlight between -5 and +30 °C with the lid tightly closed. Avoid freezing.


20 kg, 10 kg, 3.5 kg


Compatible with TSE 5808

Related Products