Suitable for use on tennis courts (open, semi-open areas), multi-purpose sports fields, concrete-based sports floors, walking paths…
Get More DetailsFields Of Use
Briland Water Based Fire Retardant Paint
It is suitable for indoor and outdoor use in concrete, wood, steel, and prefabricated structures. It can be applied in all kinds of areas where fire retardancy is required, such as fire escapes, constructions, factories, military facilities, schools, and hospitals.
Properties
It is water-based and designed for fire safety. During a fire, Briland Fire Retardant Paint undergoes a chemical reaction, swells, and forms an insulation layer. This insulation layer helps slow down the spread of fire. It prevents the temperature on the surface from rising to critical levels. Its reaction to fire class is B s1 d0. No ignition or flame was observed on the surface exposed to 1400°C flame from 10 cm for 180 min. Additionally, the temperature on the back surface was measured as 312°C.
Briland Water Based Fire Retardant Paint
Fields of Use
It is suitable for indoor and outdoor use in concrete, wood, steel, and prefabricated structures. It can be applied in all kinds of areas where fire retardancy is required, such as fire escapes, constructions, factories, military facilities, schools, and hospitals.
Specifications
It is water-based and designed for fire safety. During a fire, Briland Fire Retardant Paint undergoes a chemical reaction, swells, and forms an insulation layer. This insulation layer helps slow down the spread of fire. It prevents the temperature on the surface from rising to critical levels. Its reaction to fire class is B s1 d0. No ignition or flame was observed on the surface exposed to 1400°C flame from 10 cm for 180 min. Additionally, the temperature on the back surface was measured as 312°C.
Görünüm: yarımat düz
Kimyasal yapısı: Akrilik kopolimer
Viskozite (25°C): 140 – 145
Çözücü: Su Ph (25°C): 8-9
Önerilen Uygulama: iki kat
Kuruma süresi: Tam kuruma süresi azami 24 saattir. Katlar arası bekleme süresi asgari 3 saattir. ifadesinin ve tablonun büyük/küçük harf düzenini koruyarak yapılan çevirileri:
İNGİLİZCE (ENGLISH)
Appearance: semimatt flat
Chemical structure: Acrylic copolymer
Viscosity (25°C): 140 – 145
Solvent: Water Ph (25°C): 8-9
Recommended Application: two coats
Drying time: Full drying time is maximum 24 hours. Waiting time between coats is minimum 3 hours.
| Test Method | Parameter | Number of Tests | Test Results and Evaluation | |
|---|---|---|---|---|
| Average of Continuous Variables | Non-Continuous Variables | |||
| TS EN ISO 11925-2 (30s surface application) | Fs ≤ 150 mm within 60 s | 6 | (-) | No flaming exceeding 150 mm |
| No burning in filter paper | (-) | No burning | ||
| TS EN ISO 11925-2 (30s edge application) | Fs ≤ 150 mm within 60 s | 6 | (-) | No flaming exceeding 150 mm |
| No burning in filter paper | (-) | No burning | ||
| TS EN 13823+A1 | FIGRA0.2 ≤ 120 W/s | 3 | 2.32 | (-) |
| FIGRA0.4 | 2.32 | (-) | ||
| THR600s ≤ 7.5 MJ | 0.80 | (-) | ||
| LFS < Edge of specimen | (-) | LFS < Edge | ||
| SMOGRA ≤ 30 m²/s² | 0.00 | (-) | ||
| TSP600s ≤ 50 m² | 37.39 | (-) | ||
| No flaming droplets within 600 s | (-) | No flaming droplets | ||
Surfaces must be sound, dry, clean and in a condition to carry the paint. Any oil, dirt, blistered paint or rust on the surface should be cleaned. Cracked and damaged surfaces should be repaired and corrected before application. The temperature of the surface to be applied and the environment must be between +5°C and +30°C. Before applying Briland Fire Retardant Paint, a Kardelen Boya primer suitable for the surface should be applied and the drying time written on it should be waited. The paint should be mixed well before application. It is recommended to apply two coats on the primer without thinning at 3-hour intervals. It can be applied in two coats by brush, roller or spraying method. If the application is to be made on exterior facades, a final coat of paint is recommended.
It is ready for use.
Depending on the absorbency of the surface and the desired resistance time, 1.8 kg/m² for 0.60-0.62 mm thickness; 10-12m²/kg for 0.09-0.10 mm thickness (material thickness varies depending on the desired flame retardant resistance time.)
It can be stored for up to 2 years in cool, dry places away from sunlight, between -5 and +30°C. It should be protected from freezing.
Kardelen Boya Color Chart
1- TSE 2024-40150 (TS EN 13501-1, TS EN 13823, TS EN ISO 11925-2)
2- Saniter 2130458-24
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Görünüm: yarımat düz
Kimyasal yapısı: Akrilik kopolimer
Viskozite (25°C): 140 – 145
Çözücü: Su Ph (25°C): 8-9
Önerilen Uygulama: iki kat
Kuruma süresi: Tam kuruma süresi azami 24 saattir. Katlar arası bekleme süresi asgari 3 saattir. ifadesinin ve tablonun büyük/küçük harf düzenini koruyarak yapılan çevirileri:
İNGİLİZCE (ENGLISH)
Appearance: semimatt flat
Chemical structure: Acrylic copolymer
Viscosity (25°C): 140 – 145
Solvent: Water Ph (25°C): 8-9
Recommended Application: two coats
Drying time: Full drying time is maximum 24 hours. Waiting time between coats is minimum 3 hours.
| Test Method | Parameter | Number of Tests | Test Results and Evaluation | |
|---|---|---|---|---|
| Average of Continuous Variables | Non-Continuous Variables | |||
| TS EN ISO 11925-2 (30s surface application) | Fs ≤ 150 mm within 60 s | 6 | (-) | No flaming exceeding 150 mm |
| No burning in filter paper | (-) | No burning | ||
| TS EN ISO 11925-2 (30s edge application) | Fs ≤ 150 mm within 60 s | 6 | (-) | No flaming exceeding 150 mm |
| No burning in filter paper | (-) | No burning | ||
| TS EN 13823+A1 | FIGRA0.2 ≤ 120 W/s | 3 | 2.32 | (-) |
| FIGRA0.4 | 2.32 | (-) | ||
| THR600s ≤ 7.5 MJ | 0.80 | (-) | ||
| LFS < Edge of specimen | (-) | LFS < Edge | ||
| SMOGRA ≤ 30 m²/s² | 0.00 | (-) | ||
| TSP600s ≤ 50 m² | 37.39 | (-) | ||
| No flaming droplets within 600 s | (-) | No flaming droplets | ||
Surfaces must be sound, dry, clean and in a condition to carry the paint. Any oil, dirt, blistered paint or rust on the surface should be cleaned. Cracked and damaged surfaces should be repaired and corrected before application. The temperature of the surface to be applied and the environment must be between +5°C and +30°C. Before applying Briland Fire Retardant Paint, a Kardelen Boya primer suitable for the surface should be applied and the drying time written on it should be waited. The paint should be mixed well before application. It is recommended to apply two coats on the primer without thinning at 3-hour intervals. It can be applied in two coats by brush, roller or spraying method. If the application is to be made on exterior facades, a final coat of paint is recommended.
It is ready for use.
Depending on the absorbency of the surface and the desired resistance time, 1.8 kg/m² for 0.60-0.62 mm thickness; 10-12m²/kg for 0.09-0.10 mm thickness (material thickness varies depending on the desired flame retardant resistance time.)
It can be stored for up to 2 years in cool, dry places away from sunlight, between -5 and +30°C. It should be protected from freezing.
Kardelen Boya Color Chart
1- TSE 2024-40150 (TS EN 13501-1, TS EN 13823, TS EN ISO 11925-2)
2- Saniter 2130458-24
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
Outdoor terraces, balconies, poolside areas, walkways, and landscaping; indoor showrooms, offices, decorative residential floors, and hallways; commercial…
Get More Details
It is a water-based, pure acrylic glossy topcoat paint that provides strong adherence to challenging surfaces such…
Get More Details
It is used on the interior surfaces of construction elements such as plaster, gross concrete, brick, paper…
Get More Details