Outdoor terraces, balconies, poolside areas, walkways, and landscaping; indoor showrooms, offices, decorative residential floors, and hallways; commercial…
Get More DetailsFields Of Use
Briland Court Paint
Suitable for use on tennis courts (open, semi-open areas), multi-purpose sports fields, concrete-based sports floors, walking paths and running tracks, parks, schoolyards, and recreational areas.
Properties
Briland court paint is a pure acrylic copolymer-based, water-based, and abrasion-resistant floor coating paint developed for tennis courts and similar outdoor sports floors. Thanks to its high UV resistance, strong adhesion, and controlled non-slip surface, it provides long-lasting performance on professional sports fields. It is resistant to atmospheric conditions, water, and wear. It resists fading and yellowing. It has a structure resistant to scratching and abrasion. It has high covering power. It has high spreading properties, saving time and labor.
Briland Court Paint
Fields of Use
Suitable for use on tennis courts (open, semi-open areas), multi-purpose sports fields, concrete-based sports floors, walking paths and running tracks, parks, schoolyards, and recreational areas.
Specifications
Briland court paint is a pure acrylic copolymer-based, water-based, and abrasion-resistant floor coating paint developed for tennis courts and similar outdoor sports floors. Thanks to its high UV resistance, strong adhesion, and controlled non-slip surface, it provides long-lasting performance on professional sports fields. It is resistant to atmospheric conditions, water, and wear. It resists fading and yellowing. It has a structure resistant to scratching and abrasion. It has high covering power. It has high spreading properties, saving time and labor.
Appearance: Silk-gloss smooth paint;
Chemical structure: Acrylic copolymer emulsion;
Viscosity: 120 KU – 125 KU at 25°C;
Thinner: Water; pH: 8-9;
Recommended application: 2 or 3 coats (depending on surface contamination and roughness);
Drying time: Dust-free: 1 hour, Touch dry: 2 hours, Full dry: 24 hours. Waiting time between coats is a minimum of 2 hours.
Surfaces to be applied with Briland Court Paint must be sound, dry, clean, and capable of supporting the paint. Oil, dirt, loose particles, and old paint residues must be cleaned. New concrete surfaces must have completed their curing process for at least 28 days. Surface defects should be repaired using Promax Floor Repair Putty.
The system to be applied to the court surface should be determined according to the field’s intended use, athlete level, and desired game characteristics (slow – medium – fast court). The thinning ratio, sand grain size, and usage amount are determined by taking into account the purpose of the floor, the sports branch, and the targeted ball bounce speed (game characteristic). Sand grain size, dosage, and paint thinning ratio should be clarified before application, and the same parameters should be maintained throughout the process. * As sand grain size decreases: The surface becomes smoother; ball bounce speed increases; the game becomes faster. * As sand amount increases: Slip resistance increases, player safety improves, ball bounce speed decreases. * As thinning ratio increases: The surface becomes more closed and smoother, sand is distributed more homogeneously on the surface, creating fast court characteristics.
It can be applied with a squeegee or roller. During application, surface and ambient temperature must be at least +5 °C and at most 30 °C. Application should not be carried out in rainy, windy weather or under direct sunlight.
It is thinned with clean water, free of other solvents or foreign substances, in necessary proportions according to criteria determined based on surface and application conditions.
6-8 m²/L (single coat). It varies depending on surface absorbency, roughness, amount of sand, and application method.
It can be stored for 2 years in its original unopened packaging, in cool, dry environments protected from sunlight, at temperatures between -5 and +30°C. It must be protected from freezing.
15 L.
Green, red
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Appearance: Silk-gloss smooth paint;
Chemical structure: Acrylic copolymer emulsion;
Viscosity: 120 KU – 125 KU at 25°C;
Thinner: Water; pH: 8-9;
Recommended application: 2 or 3 coats (depending on surface contamination and roughness);
Drying time: Dust-free: 1 hour, Touch dry: 2 hours, Full dry: 24 hours. Waiting time between coats is a minimum of 2 hours.
Surfaces to be applied with Briland Court Paint must be sound, dry, clean, and capable of supporting the paint. Oil, dirt, loose particles, and old paint residues must be cleaned. New concrete surfaces must have completed their curing process for at least 28 days. Surface defects should be repaired using Promax Floor Repair Putty.
The system to be applied to the court surface should be determined according to the field’s intended use, athlete level, and desired game characteristics (slow – medium – fast court). The thinning ratio, sand grain size, and usage amount are determined by taking into account the purpose of the floor, the sports branch, and the targeted ball bounce speed (game characteristic). Sand grain size, dosage, and paint thinning ratio should be clarified before application, and the same parameters should be maintained throughout the process. * As sand grain size decreases: The surface becomes smoother; ball bounce speed increases; the game becomes faster. * As sand amount increases: Slip resistance increases, player safety improves, ball bounce speed decreases. * As thinning ratio increases: The surface becomes more closed and smoother, sand is distributed more homogeneously on the surface, creating fast court characteristics.
It can be applied with a squeegee or roller. During application, surface and ambient temperature must be at least +5 °C and at most 30 °C. Application should not be carried out in rainy, windy weather or under direct sunlight.
It is thinned with clean water, free of other solvents or foreign substances, in necessary proportions according to criteria determined based on surface and application conditions.
6-8 m²/L (single coat). It varies depending on surface absorbency, roughness, amount of sand, and application method.
It can be stored for 2 years in its original unopened packaging, in cool, dry environments protected from sunlight, at temperatures between -5 and +30°C. It must be protected from freezing.
15 L.
Green, red
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
It is a high-performance liquid waterproofing membrane developed for use in structures requiring water and moisture resistance,…
Get More Details
It is suitable for indoor and outdoor use in concrete, wood, steel, and prefabricated structures. It can…
Get More Details
It is used on inner surfaces of building elements such as coating, exposed concrete, brick, wallpaper, chipboard,…
Get More Details