Briland Heat Insulated Extra Exterior Paint


It is used on plaster, exposed concrete, brick, aerated concrete, previously painted surfaces and mineral plaster surfaces.


Due to its water-based special formula, it provides heat saving up to 10%. It exhibits high water and moisture resistance due to pure acrylic binders and special silicone. It adheres well to applied surfaces. It has a high opacity. Due to the special color pigments, colors do not fade. It has a hydrocatalytic feature. Breathing ability is high, it can be safely applied on heat insulation systems. Spreading feature is high, so it is easy to apply. It saves time and labor. It is resistant against weather conditions and rubbing.


Appearance: Silk gloss
Chemical Structure: Acrylic copolymer emulsion
Viscosity: 120 KU -125 KU at 25 °C
Thinner: Water
Ph: 8-9
Recommended Application: 2 or 3 coats (depending on the dirtiness and roughness of the surface)
Drying period: Full drying period is max. 24 hours, time to wait between two coats is min. 2 hours.


Application surfaces should be durable, dry, clean and able to carry the paint. Surfaces to be painted should be prepared in advance and primed with Kardelen Exterior Primer which will increase adherence and ensure less consumption of paint. In order to prevent waves on wide surfaces, the material should be thinned with the same ratio of water, mixed well and applied in a continuous manner. During the application surface and ambient temperature should be 5 to 30°C.


It is recommended to thin at a ratio of 10-15 % depending on surface conditions with clean water including no other solvent or foreign material; and apply two coats of paint.


With 1 lt Briland Heat Insulated Exterior Paint, 6-8m2 area can be painted.


Storable for 2 years in cool and dry places away from direct sunlight between -5 and +30 °C with the lid tightly closed. Avoid freezing.


15 lt, 2,5 lt plastic bucket


Compliant with TS 7847

Related Products