Aura Silicone Based Exterior Paint

FIELDS OF USE

It is used on conventional plaster, exposed concrete, brick, aerated concrete, bush-hammered concrete, previously painted surfaces and mineral plaster surfaces.

PROPERTIES

Due to its water-based special formula, pure acrylic binders and special silicone, it exhibits high water and moisture resistance. It adheres well to applied surfaces. It has a high opacity. Due to special color pigments in the texture, colors do not fade. Its breathing ability is high, it can be easily applied on heat insulation systems. Spreading feature is high, so it is easy to apply. It saves time and labor. It is resistant against weather conditions and friction.

TECHNICAL SPECIFICATIONS

Appearance: flat
Chemical Structure: Acrylic copolymer emulsion
Viscosity: 120 KU -125 KU at 25°C
Thinner: Water
Ph: 8-9
Solid matter quantity: 70% –72%
Recommended Application: 2 or 3 coats (depending on dirtiness and roughness of the surface)
Drying period: Full drying period is max. 24 hours, time to wait between two coats is min. 2 hours

APPLICATION

Application surfaces should be durable, dry, clean and able to carry the paint. Surfaces to be painted should be prepared in advance and primed with Kardelen Exterior Primer which will increase adherence and ensure less consumption of paint. In order to prevent waves on wide surfaces, the material should be thinned with the same ratio of water, mixed well and applied in a continuous manner. During the application surface and ambient temperature should be 5 to 30°C.

THINNING

It is recommended to thin at a ratio of 10-20 % depending on surface conditions with clean water including no other solvent or foreign material; and apply two coats of paint.

CONSUMPTION

Depending on absorption properties of the surface, with 1 kg Aura Silicone Based Exterior Paint 5-7 m2 area, and with 1 Lt, 8-10m2 area can be painted in a single coat.