It is suitable for surface preparation before Promax Single Component Special Floor Paint on floors such as…
Get More DetailsFields Of Use
Promax 2K Acrylic Topcoat Paint Set
It is used for the protection and aesthetic coating of various surfaces, especially steel and other metals, in open-air atmospheric conditions where UV resistance is required. The product is used in industrial facilities, machinery manufacturing, steel construction surfaces, and facilities with chemical processes.
Properties
It is a two-component topcoat paint cured with acrylic resin and aliphatic isocyanate. It shows superior resistance to mechanical and physical effects with an excellent balance of elasticity and hardness. It is resistant to chemicals. It offers high and permanent gloss and color intensity. Thanks to its superior UV resistance, it does not yellow or fade. It has high adhesion capability and fast drying properties.
Promax 2K Acrylic Topcoat Paint Set
Fields of Use
It is used for the protection and aesthetic coating of various surfaces, especially steel and other metals, in open-air atmospheric conditions where UV resistance is required. The product is used in industrial facilities, machinery manufacturing, steel construction surfaces, and facilities with chemical processes.
Specifications
It is a two-component topcoat paint cured with acrylic resin and aliphatic isocyanate. It shows superior resistance to mechanical and physical effects with an excellent balance of elasticity and hardness. It is resistant to chemicals. It offers high and permanent gloss and color intensity. Thanks to its superior UV resistance, it does not yellow or fade. It has high adhesion capability and fast drying properties.
Appearance: glossy topcoat paint
Chemical structure: Acrylic resin, polyisocyanate (HDI) combination
Viscosity (at 25°C): A: 100-110 KU A+B: 50-55 KU
Gloss (60°): 95-100 gloss
Thinner: Acrylic Thinner
Solid content (by weight %): 50% – 60% (varies depending on color)
Fineness: 5 microns
Drying (20°C and 50% relative humidity): Flash off: 5-10 min; Touch dry: 1.5-2 hours; Full curing: 24 hours.
Application surfaces must be clean, sound, and free of residues such as dirt, oil, dust, and rust that would prevent paint adhesion. To achieve higher performance, it is recommended to apply Promax Solvent-Based Epoxy Primer to the surface before the topcoat application. Components A and B are mixed in the specified ratios (4+1). (The packages are prepared according to the full mixing ratio; the material should not be increased.) Component A is started to be mixed with a mechanical mixer, and component B is added slowly while continuing to mix for 5-10 minutes. If necessary, the application viscosity can be adjusted by thinning with a maximum of 10% Acrylic Thinner. It can be applied by roller, brush, conventional suction-fed, or gravity-fed air spray gun (1.8 mm-2 mm. Air pressure: HVLP 2.5-3.5 BAR). The pot life of the mixture is 4 – 5 hours at 20 °C.
It can be made ready for use by thinning up to a maximum of 10% with Acrylic Thinner, depending on the application method.
12-14 m2/kg at 40 micron film thickness. Consumption varies depending on the type of surface, its absorbency, and application habits. A controlled sample study should be conducted for exact consumption.
It can be stored for 2 years in its unopened packaging in cool, dry environments away from direct sunlight. It must be protected from freezing.
16 kg paint (component A) + 4 kg hardener (component B) tin can
RAL color chart
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Appearance: glossy topcoat paint
Chemical structure: Acrylic resin, polyisocyanate (HDI) combination
Viscosity (at 25°C): A: 100-110 KU A+B: 50-55 KU
Gloss (60°): 95-100 gloss
Thinner: Acrylic Thinner
Solid content (by weight %): 50% – 60% (varies depending on color)
Fineness: 5 microns
Drying (20°C and 50% relative humidity): Flash off: 5-10 min; Touch dry: 1.5-2 hours; Full curing: 24 hours.
Application surfaces must be clean, sound, and free of residues such as dirt, oil, dust, and rust that would prevent paint adhesion. To achieve higher performance, it is recommended to apply Promax Solvent-Based Epoxy Primer to the surface before the topcoat application. Components A and B are mixed in the specified ratios (4+1). (The packages are prepared according to the full mixing ratio; the material should not be increased.) Component A is started to be mixed with a mechanical mixer, and component B is added slowly while continuing to mix for 5-10 minutes. If necessary, the application viscosity can be adjusted by thinning with a maximum of 10% Acrylic Thinner. It can be applied by roller, brush, conventional suction-fed, or gravity-fed air spray gun (1.8 mm-2 mm. Air pressure: HVLP 2.5-3.5 BAR). The pot life of the mixture is 4 – 5 hours at 20 °C.
It can be made ready for use by thinning up to a maximum of 10% with Acrylic Thinner, depending on the application method.
12-14 m2/kg at 40 micron film thickness. Consumption varies depending on the type of surface, its absorbency, and application habits. A controlled sample study should be conducted for exact consumption.
It can be stored for 2 years in its unopened packaging in cool, dry environments away from direct sunlight. It must be protected from freezing.
16 kg paint (component A) + 4 kg hardener (component B) tin can
RAL color chart
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
It provides permanent repair for defective floors. It is used to repair damaged, cracked, worn, and pitted…
Get More Details
It is suitable for use on floors such as concrete, asphalt, and stone in various areas such…
Get More Details
It is used for the protection and aesthetic coating of surfaces such as metals like steel and…
Get More Details