It provides permanent repair for defective floors. It is used to repair damaged, cracked, worn, and pitted…
Get More DetailsFields Of Use
Promax Floor Primer
It is suitable for surface preparation before Promax Single Component Special Floor Paint on floors such as concrete, asphalt, and stone in various areas such as factories, workplaces, industrial and warehouse areas, walkways, highways, indoor and outdoor parking lots, and school grounds.
Properties
It is a 1K acrylic resin-based special floor primer. Thanks to its single-component structure and fast drying, it provides ease of application. It regulates surface absorbency and seals dust. It increases the adhesion strength of the paint to be applied on top.
Promax Floor Primer
Fields of Use
It is suitable for surface preparation before Promax Single Component Special Floor Paint on floors such as concrete, asphalt, and stone in various areas such as factories, workplaces, industrial and warehouse areas, walkways, highways, indoor and outdoor parking lots, and school grounds.
Specifications
It is a 1K acrylic resin-based special floor primer. Thanks to its single-component structure and fast drying, it provides ease of application. It regulates surface absorbency and seals dust. It increases the adhesion strength of the paint to be applied on top.
Appearance: flat, transparent
Chemical structure: acrylic resin, solvent-based
Thinner: Ready to use
Viscosity: 50-60 KU
Drying time: Touch dry: 5-10 min, Dust-free dry: 10-15 min
Waiting time between coats: 2-3 hours, full dry: 24 hours.
Recommended application: 1 coat
- Surface preparation: The application surface must be sound, clean, dry, oil-free, smooth, set, dust-free, and in a condition to support the paint. There should be no chemical layer on the surface (e.g., surface hardener for concrete). Cracks, pits, and defects on the surface should be repaired with Promax Floor Repair Putty. You should wait for 1 hour after the repair putty application.
- Cleaning: The floor should be cleaned by sweeping, with air, and with cellulosic thinner. Moisture control: Moisture measurement should be carried out on the floor before application, and it must be ensured that the floor has released its moisture.
- Application: Promax Floor Primer should be mixed thoroughly before application. Application can be done by roller, brush, or spray method at an ambient temperature between +5°C and +30°C. You should wait for 2-3 hours after the primer application.
It is ready to use, do not thin
Depending on the application method, surface characteristics, and film thickness, consumption in a single coat is 10-12 m²/kg. A controlled sample study should be conducted for exact consumption.
It can be stored for up to 2 years in its unopened packaging in a cool, dry, and ventilated place at temperatures between 5-30°C, away from direct sunlight.
12 Kg
Transparent
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Appearance: flat, transparent
Chemical structure: acrylic resin, solvent-based
Thinner: Ready to use
Viscosity: 50-60 KU
Drying time: Touch dry: 5-10 min, Dust-free dry: 10-15 min
Waiting time between coats: 2-3 hours, full dry: 24 hours.
Recommended application: 1 coat
- Surface preparation: The application surface must be sound, clean, dry, oil-free, smooth, set, dust-free, and in a condition to support the paint. There should be no chemical layer on the surface (e.g., surface hardener for concrete). Cracks, pits, and defects on the surface should be repaired with Promax Floor Repair Putty. You should wait for 1 hour after the repair putty application.
- Cleaning: The floor should be cleaned by sweeping, with air, and with cellulosic thinner. Moisture control: Moisture measurement should be carried out on the floor before application, and it must be ensured that the floor has released its moisture.
- Application: Promax Floor Primer should be mixed thoroughly before application. Application can be done by roller, brush, or spray method at an ambient temperature between +5°C and +30°C. You should wait for 2-3 hours after the primer application.
It is ready to use, do not thin
Depending on the application method, surface characteristics, and film thickness, consumption in a single coat is 10-12 m²/kg. A controlled sample study should be conducted for exact consumption.
It can be stored for up to 2 years in its unopened packaging in a cool, dry, and ventilated place at temperatures between 5-30°C, away from direct sunlight.
12 Kg
Transparent
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
It is suitable for use on floors such as concrete, asphalt, and stone in various areas such…
Get More Details
It is used for the protection and aesthetic coating of various surfaces, especially steel and other metals,…
Get More Details
It is used for the protection and aesthetic coating of surfaces such as metals like steel and…
Get More Details