It is suitable for surface preparation before Promax Single Component Special Floor Paint on floors such as…
Get More DetailsFields Of Use
Promax Floor Repair Putty
It provides permanent repair for defective floors. It is used to repair damaged, cracked, worn, and pitted floors such as concrete, stone, and asphalt. It is suitable for use in various areas such as factories, stations, dispatch areas, workplaces, industrial and warehouse areas, walkways, highways, indoor and outdoor parking lots, and school grounds.
Properties
It is a two-component special floor repair putty for permanent repairs. By forming a very solid structure, it provides maximum resistance to physical and weather conditions. It maintains its strength and form for a long time against impacts and heavy loads. Thanks to its fast drying, it allows the application area to be opened to traffic in a short time.
Promax Floor Repair Putty
Fields of Use
It provides permanent repair for defective floors. It is used to repair damaged, cracked, worn, and pitted floors such as concrete, stone, and asphalt. It is suitable for use in various areas such as factories, stations, dispatch areas, workplaces, industrial and warehouse areas, walkways, highways, indoor and outdoor parking lots, and school grounds.
Specifications
It is a two-component special floor repair putty for permanent repairs. By forming a very solid structure, it provides maximum resistance to physical and weather conditions. It maintains its strength and form for a long time against impacts and heavy loads. Thanks to its fast drying, it allows the application area to be opened to traffic in a short time.
Appearance: grey, viscous paste
Chemical structure: MMA resin, solvent-based, two-component
Thinner: Ready to use, do not thin
Viscosity: >140KU
Drying time: Depending on application thickness, initial dry: 1 hour, full dry: 24 hours (at +20°C to +25°C).
Recommended application: 1 coat
- Surface preparation: The application surface must be sound, clean, dry, oil-free, set, dust-free, and in a condition to support the paint. There should be no chemical layer on the surface (e.g., surface hardener for concrete). The floor should be cleaned by sweeping, with air, and with cellulosic thinner. Moisture measurement should be carried out on the floor before application, and it must be ensured that the floor has released its moisture.
- Application: Powder and liquid components are thoroughly mixed using a mechanical method. Since it will form a viscous structure, special attention should be paid to ensuring the mixture is homogeneous. It is applied by spreading on the floor at +20°C to +25°C; corrections can be made with a trowel. Due to its product structure, it covers pores by spreading. The workability/correction time of the mixed product is 15-20 minutes depending on the temperature. At least 1 hour should be allowed at +20°C to +25°C before opening the area for use.
- Optional painting and varnishing: Promax Single Component Floor Paint and Promax Floor Varnish can be applied over it.
It is ready to use, do not thin.
Depending on the application method, surface characteristics, and the area to be filled, consumption is 0.5 – 1 m³/kg. A controlled sample study should be conducted for exact consumption.
It can be stored for up to 2 years in its unopened original packaging in a cool, dry, and ventilated place at temperatures between 5-30°C, away from direct sunlight.
15+4 Kg
Grey
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Appearance: grey, viscous paste
Chemical structure: MMA resin, solvent-based, two-component
Thinner: Ready to use, do not thin
Viscosity: >140KU
Drying time: Depending on application thickness, initial dry: 1 hour, full dry: 24 hours (at +20°C to +25°C).
Recommended application: 1 coat
- Surface preparation: The application surface must be sound, clean, dry, oil-free, set, dust-free, and in a condition to support the paint. There should be no chemical layer on the surface (e.g., surface hardener for concrete). The floor should be cleaned by sweeping, with air, and with cellulosic thinner. Moisture measurement should be carried out on the floor before application, and it must be ensured that the floor has released its moisture.
- Application: Powder and liquid components are thoroughly mixed using a mechanical method. Since it will form a viscous structure, special attention should be paid to ensuring the mixture is homogeneous. It is applied by spreading on the floor at +20°C to +25°C; corrections can be made with a trowel. Due to its product structure, it covers pores by spreading. The workability/correction time of the mixed product is 15-20 minutes depending on the temperature. At least 1 hour should be allowed at +20°C to +25°C before opening the area for use.
- Optional painting and varnishing: Promax Single Component Floor Paint and Promax Floor Varnish can be applied over it.
It is ready to use, do not thin.
Depending on the application method, surface characteristics, and the area to be filled, consumption is 0.5 – 1 m³/kg. A controlled sample study should be conducted for exact consumption.
It can be stored for up to 2 years in its unopened original packaging in a cool, dry, and ventilated place at temperatures between 5-30°C, away from direct sunlight.
15+4 Kg
Grey
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
It is suitable for use on floors such as concrete, asphalt, and stone in various areas such…
Get More Details
It is used for the protection and aesthetic coating of various surfaces, especially steel and other metals,…
Get More Details
It is used for the protection and aesthetic coating of surfaces such as metals like steel and…
Get More Details