It can be safely used indoors and outdoors on metal, wood, and various building materials. It is…
Get More DetailsFields Of Use
Promax Heat Resistant Paint
It is used on all types of metal surfaces; chimneys, stoves and exhaust systems, pipes through which hot gases or liquids pass, boilers, furnace surfaces, pellet stoves, and similar metal surfaces exposed to high temperatures.
Properties
It is a silicone resin-based, heat-curing topcoat paint resistant to high temperatures up to 600°C. With its superior adhesion power, high opacity, and impact resistance, it provides long-term protection especially on metal surfaces exposed to high heat.
Promax Heat Resistant Paint
Fields of Use
It is used on all types of metal surfaces; chimneys, stoves and exhaust systems, pipes through which hot gases or liquids pass, boilers, furnace surfaces, pellet stoves, and similar metal surfaces exposed to high temperatures.
Specifications
It is a silicone resin-based, heat-curing topcoat paint resistant to high temperatures up to 600°C. With its superior adhesion power, high opacity, and impact resistance, it provides long-term protection especially on metal surfaces exposed to high heat.
Appearance: Matt paint
Chemical structure: silicone resin-based
Viscosity (25°C): 85 KU–95 KU
Solid Content (by weight): 70% – 75%
Fineness: 5 microns
Drying time (20°C): Touch dry: 1 hour, stackability: 24 hours, full cure: 30 min at 250 °C.
The surfaces to be applied must be free from all mechanical and chemical contaminants such as oil, dirt, rust, and oxide layers. The surface should be blasted in accordance with Sa 2½ (ISO 8501-1) standard. After blasting, the surface should be painted within 5 hours at most, depending on atmospheric conditions. The paint should be mixed thoroughly before application. During application, the surface and ambient temperature should be between +5 and +30 °C, and the relative humidity should be below 80%. It can be applied by airless spray, roller, or brush. The waiting time between coats is a minimum of 24 hours at 20°C or 30 minutes at 250°C. It can be applied to reach a total dry film thickness of 40-45 µ. For full cure, it should be kept at 250°C for 30 minutes.
It is ready for use and does not require thinning.
7-8 m²/L for 40-45 µ dry film thickness. It varies depending on the type of surface, absorbency, and application thickness. A controlled sample study should be conducted for exact consumption.
It can be stored for 2 years in its original unopened packaging, in cool, dry environments protected from direct sunlight, at temperatures between 0 and +30°C. It must be protected from freezing.
15 kg, 2.5 kg, 0.70 kg tin cans
Black, metallic grey
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Appearance: Matt paint
Chemical structure: silicone resin-based
Viscosity (25°C): 85 KU–95 KU
Solid Content (by weight): 70% – 75%
Fineness: 5 microns
Drying time (20°C): Touch dry: 1 hour, stackability: 24 hours, full cure: 30 min at 250 °C.
The surfaces to be applied must be free from all mechanical and chemical contaminants such as oil, dirt, rust, and oxide layers. The surface should be blasted in accordance with Sa 2½ (ISO 8501-1) standard. After blasting, the surface should be painted within 5 hours at most, depending on atmospheric conditions. The paint should be mixed thoroughly before application. During application, the surface and ambient temperature should be between +5 and +30 °C, and the relative humidity should be below 80%. It can be applied by airless spray, roller, or brush. The waiting time between coats is a minimum of 24 hours at 20°C or 30 minutes at 250°C. It can be applied to reach a total dry film thickness of 40-45 µ. For full cure, it should be kept at 250°C for 30 minutes.
It is ready for use and does not require thinning.
7-8 m²/L for 40-45 µ dry film thickness. It varies depending on the type of surface, absorbency, and application thickness. A controlled sample study should be conducted for exact consumption.
It can be stored for 2 years in its original unopened packaging, in cool, dry environments protected from direct sunlight, at temperatures between 0 and +30°C. It must be protected from freezing.
15 kg, 2.5 kg, 0.70 kg tin cans
Black, metallic grey
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
It allows the multi-layered paint, varnish, primer and putty on metal surfaces to be removed from the…
Get More Details
It is used as finish on all kinds of metal, wood, iron constructions, agricultural machines and their…
Get More Details
It is used as finish on all kinds of metal, wood, iron constructions, agricultural machines and their…
Get More Details