It is used as an Primer on plaster, exposed concrete, chipboard, brick…
FIELDS OF USE
Waterproofing
It is applied easily and safely in concrete constructions, brick, aerated concrete, wood, roof coverings, terraces and water tanks where water and moisture impermeability is required.
PROPERTIES
The product includes fiber. It does not contain tar, asphalt or solvent. It is an elastic and decorative liquid membrane waterproofing material.
Appearance: Flat appearance
Chemical Structure: Styrene acrylic copolymer emulsion and plasticizer combination
Thinner: Water
Ph: 8-9
Recommended Application: 3 coats.
Drying period: Initial drying at room temperature 12, full drying 24 hours (These times may vary depending on air temperature, application thickness, surface moisture and ambient temperature.)
Application surfaces should be removed from all kinds of foreign materials such as dirt and dust. The surface should be dry and clean. Primer should be applied to the prepared surface as the first coat. After the Primer dries, waterproofing should be applied as 2 or 3 coats without thinning. Application should be done in crosses by waiting for 24 hours between each coat.
In a single coat for horizontal applications 1-1,5 kg/m2, vertical applications 0.800-1 kg /m2. (Consumption rates are approximate figures and may differ depending on the mesh structure of the surface.)
Storable for 2 years in cool and dry places away from direct sunlight between -5 and +30 °C with the lid tightly closed. Avoid freezing.
20 kg, 10 kg, 3,5 kg, 1 kg plastic bucket
White
