A matte varnish formulated for use on all types of solid and veneered wooden surfaces in furniture…
Get More DetailsFields Of Use
Promax Polyurethane Panel Door Paint Set
It is used as a decorative and protective topcoat on American panel doors, solid wood, and MDF surfaces used in interiors. It is ideal for high-quality coating applications on kitchen and bathroom cabinet doors in the furniture industry.
Properties
It hides surface imperfections and provides a homogeneous appearance without obscuring the panel door patterns. It exhibits superior resistance to scratches, impacts, and abrasions. It is resistant to household cleaning materials, water, and moisture. Its dust-free and hardening times are short, making it suitable for mass production lines.
Promax Polyurethane Panel Door Paint Set
Fields of Use
It is used as a decorative and protective topcoat on American panel doors, solid wood, and MDF surfaces used in interiors. It is ideal for high-quality coating applications on kitchen and bathroom cabinet doors in the furniture industry.
Specifications
It hides surface imperfections and provides a homogeneous appearance without obscuring the panel door patterns. It exhibits superior resistance to scratches, impacts, and abrasions. It is resistant to household cleaning materials, water, and moisture. Its dust-free and hardening times are short, making it suitable for mass production lines.
Chemical Structure: Polyurethane resin based
Appearance: Matt, silk-matt, glossy options
Density: 1.20-1.35 (may vary by color and gloss level)
Solid Content: 55% – 65% (may vary by color and gloss level)
Mixing Ratio: 4+1
Pot Life: 3-4 hours (at 20°C)
Drying Times (23°C, 50% relative humidity): Dust-free: 15-20 min
Touch Dry: 45-60 min, Full cure: 24 hours.
Wooden surfaces to be treated must be dry, clean, and completely free of dust, oil, and old varnish residues. It should not be applied to damp wood. It is applied by pressing into the gaps on the surface with the help of a stainless steel trowel or spatula. In deep gaps (more than 5 mm), it is recommended to apply the filler in layers instead of a single application, allowing each layer to dry in between. After the filler is completely dry (approx. 2-4 hours), surface excesses are removed and smoothed with appropriate grit sandpaper. Tools used should be cleaned with water immediately after application. The packaging lid should be tightly closed after use to prevent the product from drying out.
The product is ready to use; it does not require thinning.
It varies depending on the defect and depth of the applied surface. Theoretically, for 1 mm thickness, it is approximately 1.5 – 1.8 kg/m².
It can be stored for 1 year in its unopened original packaging, in a cool and dry environment, protected from direct sunlight. It must be protected from freezing and extreme heat.
0.75 L, 0.35 L plastic tube packaging
White
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Chemical Structure: Polyurethane resin based
Appearance: Matt, silk-matt, glossy options
Density: 1.20-1.35 (may vary by color and gloss level)
Solid Content: 55% – 65% (may vary by color and gloss level)
Mixing Ratio: 4+1
Pot Life: 3-4 hours (at 20°C)
Drying Times (23°C, 50% relative humidity): Dust-free: 15-20 min
Touch Dry: 45-60 min, Full cure: 24 hours.
Wooden surfaces to be treated must be dry, clean, and completely free of dust, oil, and old varnish residues. It should not be applied to damp wood. It is applied by pressing into the gaps on the surface with the help of a stainless steel trowel or spatula. In deep gaps (more than 5 mm), it is recommended to apply the filler in layers instead of a single application, allowing each layer to dry in between. After the filler is completely dry (approx. 2-4 hours), surface excesses are removed and smoothed with appropriate grit sandpaper. Tools used should be cleaned with water immediately after application. The packaging lid should be tightly closed after use to prevent the product from drying out.
The product is ready to use; it does not require thinning.
It varies depending on the defect and depth of the applied surface. Theoretically, for 1 mm thickness, it is approximately 1.5 – 1.8 kg/m².
It can be stored for 1 year in its unopened original packaging, in a cool and dry environment, protected from direct sunlight. It must be protected from freezing and extreme heat.
0.75 L, 0.35 L plastic tube packaging
White
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
Used for filling cracks, holes, and joints on all types of solid wood, MDF, particleboard, and veneered…
Get More Details
Used for surface preparation of interior American panel doors, solid wood, and MDF surfaces before painting. It…
Get More Details
It is used for the protection and aesthetic coating of surfaces such as metals like steel and…
Get More Details