It is a water-based, pure acrylic glossy topcoat paint that provides strong adherence to challenging surfaces such…
Get More DetailsFields Of Use
Briland Black Matte Black Interior Wall Paint
It is used on the interior surfaces of construction elements such as plaster, gross concrete, brick, paper coating, chipboard, gypsum, and drywall for which the sub-floor preparation has been completed.
Properties
It has a clear black color. It is water-based and breathable. Its hiding power is high. It does not crack, blister or peel. Thanks to the high-quality pigments and additives it contains, its clear black color does not fade. It provides labor savings thanks to its spreading power during application.
Briland Black Matte Black Interior Wall Paint
Fields of Use
It is used on the interior surfaces of construction elements such as plaster, gross concrete, brick, paper coating, chipboard, gypsum, and drywall for which the sub-floor preparation has been completed.
Specifications
It has a clear black color. It is water-based and breathable. Its hiding power is high. It does not crack, blister or peel. Thanks to the high-quality pigments and additives it contains, its clear black color does not fade. It provides labor savings thanks to its spreading power during application.
Appearance: Flat black paint
Chemical structure: Acrylic copolymer emulsion
Viscosity: 120 KU -125 KU at 25°C
Thinner: Water
Ph: 8-9
Recommended application: 2 coats
Drying time: Full drying time is maximum 24 hours. Waiting time between coats is minimum 2 hours.
Surfaces must be sound, dry, clean, free of dust and in a condition to carry the paint. Ground preparation should be done by scraping and cleaning old painted, blistered, and damaged surfaces. Cracked and damaged surfaces should be repaired and corrected before application. The use of Kardelen Filled Interior Primer is recommended on absorbent surfaces such as mineral-based gypsum to be painted for the first time. The temperature of the surface to be applied and the environment must be between +5°C and +30°C. It can be applied by brush, roller or spraying method.
It is recommended to apply two coats by thinning with clean water that does not contain any other solvents or foreign substances at a rate of 10-15% depending on the surface conditions.
With 1 kg, an area of 8-10 m² can be painted in a single coat, and with 1 lt, an area of 15-17 m² can be painted depending on the absorbency of the surface.
It can be stored for up to 2 years in cool, dry places away from sunlight, between -5 and +30°C. It should be protected from freezing.
20 Kg
Black
It complies with TS 5808.
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Appearance: Flat black paint
Chemical structure: Acrylic copolymer emulsion
Viscosity: 120 KU -125 KU at 25°C
Thinner: Water
Ph: 8-9
Recommended application: 2 coats
Drying time: Full drying time is maximum 24 hours. Waiting time between coats is minimum 2 hours.
Surfaces must be sound, dry, clean, free of dust and in a condition to carry the paint. Ground preparation should be done by scraping and cleaning old painted, blistered, and damaged surfaces. Cracked and damaged surfaces should be repaired and corrected before application. The use of Kardelen Filled Interior Primer is recommended on absorbent surfaces such as mineral-based gypsum to be painted for the first time. The temperature of the surface to be applied and the environment must be between +5°C and +30°C. It can be applied by brush, roller or spraying method.
It is recommended to apply two coats by thinning with clean water that does not contain any other solvents or foreign substances at a rate of 10-15% depending on the surface conditions.
With 1 kg, an area of 8-10 m² can be painted in a single coat, and with 1 lt, an area of 15-17 m² can be painted depending on the absorbency of the surface.
It can be stored for up to 2 years in cool, dry places away from sunlight, between -5 and +30°C. It should be protected from freezing.
20 Kg
Black
It complies with TS 5808.
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
It is suitable for indoor and outdoor use in concrete, wood, steel, and prefabricated structures. It can…
Get More Details
It is used on the interior surfaces of construction elements such as plaster, gross concrete, brick, paper…
Get More Details
It is suitable to be applied on all types of interior surfaces, lower surface preparation of which…
Get More Details