It is a surface smoothing filler used in the final stage of construction or in the renovation…
Get More DetailsFields Of Use
Kardelen Satin Plaster Primer
Used as a primer on highly absorbent and high-dusting surfaces such as plaster, gypsum, drywall (plasterboard), lime whitewash, and aerated concrete.
Properties
A water-based, acrylic copolymer-based, ready-to-use transparent primer with high penetration and adhesion properties. Odorless. Creates a binding bridge between the paint and the surface, increasing the adhesion of the paint. Reduces the absorbency and dusting of the applied surface. Prevents the paint from drying prematurely. Prevents color fluctuations that may occur in the topcoat on surfaces with different absorbencies. Significantly reduces paint consumption.
Kardelen Satin Plaster Primer
Fields of Use
Used as a primer on highly absorbent and high-dusting surfaces such as plaster, gypsum, drywall (plasterboard), lime whitewash, and aerated concrete.
Specifications
A water-based, acrylic copolymer-based, ready-to-use transparent primer with high penetration and adhesion properties. Odorless. Creates a binding bridge between the paint and the surface, increasing the adhesion of the paint. Reduces the absorbency and dusting of the applied surface. Prevents the paint from drying prematurely. Prevents color fluctuations that may occur in the topcoat on surfaces with different absorbencies. Significantly reduces paint consumption.
Appearance: Transparent, colorless
Chemical structure: Acrylic copolymer emulsion
Viscosity: 60 KU – 70 KU at 25°C
Thinner: Water
pH: 8-9
Density: 1-1.05 g/cm³
Solid content: 6% – 8%
Recommended Application: 1 coat
Drying time: Full drying time is maximum 24 hours, touch-dry time is 1-2 hours.
The application surface must be sound, dry, clean, and capable of supporting the paint. Scrape and clean old painted or blistered surfaces. Repair cracks and defects. After sanding gypsum or similar surfaces, remove dust with a damp cloth, damp brush, or broom. Apply one coat between +5°C and +30°C according to surface absorbency without “combing” or over-polishing. Paint application should be done at least 4 hours after priming. Crucial: A film-like, nylon-looking layer must not form on the surface. If a glassy/glossy film appears, the topcoat may face coverage, cracking, or adhesion issues even after 7-8 coats. In such cases, sanding/scraping must continue until the glassy layer is completely removed.
Ready to use. Do not thin.
6-10 m²/L in a single coat.
2 years in unopened packaging, between -5°C and +30°C. Protect from frost.
15 L plastic bucket.
Transparent
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Appearance: Transparent, colorless
Chemical structure: Acrylic copolymer emulsion
Viscosity: 60 KU – 70 KU at 25°C
Thinner: Water
pH: 8-9
Density: 1-1.05 g/cm³
Solid content: 6% – 8%
Recommended Application: 1 coat
Drying time: Full drying time is maximum 24 hours, touch-dry time is 1-2 hours.
The application surface must be sound, dry, clean, and capable of supporting the paint. Scrape and clean old painted or blistered surfaces. Repair cracks and defects. After sanding gypsum or similar surfaces, remove dust with a damp cloth, damp brush, or broom. Apply one coat between +5°C and +30°C according to surface absorbency without “combing” or over-polishing. Paint application should be done at least 4 hours after priming. Crucial: A film-like, nylon-looking layer must not form on the surface. If a glassy/glossy film appears, the topcoat may face coverage, cracking, or adhesion issues even after 7-8 coats. In such cases, sanding/scraping must continue until the glassy layer is completely removed.
Ready to use. Do not thin.
6-10 m²/L in a single coat.
2 years in unopened packaging, between -5°C and +30°C. Protect from frost.
15 L plastic bucket.
Transparent
Disclaimer: The data is provided for informational purposes only and does not guarantee accuracy, completeness, or timeliness. For safe use, please carefully read the product label and safety data sheet. The application method, environmental conditions, and equipment selection are the responsibility of the user and may affect performance. The company is not liable for any problems or damages arising from use outside of recommended conditions. Users should contact the company for the most up-to-date technical data and additional information. All rights to this product and information are reserved. Unauthorized use of this information is prohibited.
Related Products
It is used as Primer on all mineral surfaces; gypsum surfaces; surfaces previously painted with water or…
Get More Details
It is used as a primer on plaster, exposed concrete, chipboard, brick and concrete pan, mineral based…
Get More Details
It is applied easily and safely in concrete constructions, brick, aerated concrete, wood, roof coverings, terraces and…
Get More Details